manualshive.com logo in svg

UNIMO Technology UDR-208216, User Manual, Page: 34 / 128

Share
Download
UNIMO Technology UDR-208216 User Manual Download Page 34

                                                     
                                                                                                                                                                        34 

8 & 16 Channel DVR Operation manual Revision 1.0 

 

 

 

3.2 Record Setup menu 

 

Figure. 3-8 

Record setup screen

 

3.2.1 Resolution 

Resolution for NTSC is “320 x 240” or “640 x 240”.    PAL is “320 x 288” or “640 x 288” 

selectable and selected resolution will be applicable to all channels simultaneously. 

3.2.2 Audio 

Sync 

As audio input port is one channel available, user should synchronize audio signal with 

targeted video signal. With synchronized channel will record audio as well as video. But 

others will only record video input signal only. 

3.2.3 Channel 

number 

Quality, frame rate, record conditions will be selected per channel. So users can choose 

targeted channel. All means all of channels. 

3.2.4 Quality 

Recording quality of each channel will be selectable & Normal, Enhanced, Fine, Super Fine 

4 steps are available now. 

3.2.5 

Frame rate 

User select channel’s recording frame rate and none (no recording), 1, 2, 3, 4, 5, 6, 7, 8, 9, 

10, 15, 30 fps will be available. The total for all the cannels is max 120 fps. 

But, with 640 x 240 (NTSC), 640x288 (PAL) resolution, user should not set to exceed 60 

frame per second with accumulated total channel recording. 

Summary of Contents for UDR-208216

































































































































Reviews:

No comments