UNIMO Technology UDM-240ZBH, Service Manual

Page: 13 / 33

Maintenance Manual
UDM-240ZH/ZBH
13
5
DESCRIPTION OF FUNCTION
5-1
POWER On/Off
Press the “power” button for more than 2 seconds then, the UDM is turned ON, a
“beep” sound is heard and “Ud1” or “Ud2” is displayed.
5-2
TRANSMIT
While pressing the “PTT” or “power” button for transmitting, the red LED will be on
and through the setup channel, you can communicate.
For the better sound quality, it is recommended to take 5~10cm away from your body.
According to the program versions FND can be displayed as follows.
“ ”or ” ”or ” ”or” ”
5-3
RECEIVE
User can adjust the volume level (1~8 steps) by using Up/Down button while receiving.
According to the program versions FND can be displayed as follows.
“ ”or ” ”or ” ”or” ”
5-4
CHANGE THE CHANNEL
Enter into the menu mode by pressing menu button and press Up/Down button to
change the channels.
Whenever the channel is changed, a “beep” sound will be heard.
According to the option program source the channel menu will be changed.
UDM-240ZBH: use Up/Down button in the standby mode).
 Main channel (PTT Button) : C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24
C25
 Fixed channel (power button) : C26(fixed for transmit)