①
Place two devices to pair close to each other.
② Long press
INTERCOM
BUTTON
for 3 seconds until the Red and Blue LEDs flash alternately.
[Voice Prompt: Pairing]
③ Double press
INTERCOM BUTTON
of BiT-4. [Voice Prompt: “Group Pairing”] Then, Blue LED
flashes fast to enter Universal pairing mode.
④ Now, BiT-4 is ready to be paired. Please refer to a user manual of Non-ChatterBox product to
find out the method of universal pairing.
Universal Intercom pairing method in case that Non-ChatterBox product is set as a
master:
①
Place two devices to pair close to each other.
② Long press
INTERCOM BUTTON
for 3 seconds until the Red and Blue LEDs flash alternately.
And then wait until Non-ChatterBox product search BiT-4 to pair. [Voice Prompt : Pairing]
③ Please refer to a user manual of Non-ChatterBox product to find out the method of
universal pairing.
Universal Intercom Connection / Disconnection
Universal Intercom Connection:
On OFF state, short double-press
POWER BUTTON
[ Voice Prompt: ”Intercom 2 connected”]
Universal Intercom Disconnection:
Short double-press
POWER BUTTON
[Voice Prompt:”Intercom 2 disconnected”]
※
Universal Intercom Connection or disconnection by using BiT-4
INTERCOM BUTTON
is capable
only if BiT-4 is set as a master.
※ Audio Multi-Tasking: In case that BiT-4 is set as a master, Universal Intercom can be
simultaneously operated with FM radio or Music.
※ Even if Universal Intercom communication is interrupted by a phone call, Universal Intercom
communication can stay in connection with diminished sound. After hanging up the phone call, the
Universal Intercom volume comes back to normal sound level
Intercom connection between 1:1 Intercom & Universal Intercom
In case that BiT-4 is set as a Master in the Universal Intercom Mode, this universally paired BiT-4 can
be paired with 1:1 Intercom. Its pairing method is same with the pairing method stated above.
