UNIMO Technology ChatterBox BiT-1, Manual, Page: 3 / 11

페이지
3 / 11

Main Unit with a pre-installed battery

USB charging Cable and AC Adaptor

Headset with Microphones for Open and Full face helmets. Velcro
Speaker Disks, Foam Mic-covers, Microphone Velcro

Helmet Mounting Velcro-type-sticker

Manual and ChatterBox logo sticker
BiT-2 contents

Main Unit with a pre-installed battery

USB charging Cable and AC Adaptor

Headset with Microphones for Open and Full face helmets. Velcro
Speaker Disks, Foam Mic-covers, Microphone Velcro

Helmet Mounting bracket with Cradle, Screws and Allen Wrench

Manual and ChatterBox logo sticker
(3) Battery Charging
Connect the supplied USB cable into a PC or wall Charger.
(4) Battery
This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make
sure to adhere to the following:

Never separate the battery from the product as this may damage the product

The battery performance may be reduced over time with usage

In recharging the battery, make sure to use an approved charger provided by the manufacture. Use
of a non-approved charger may cause fire, explosion, leakage, and other hazards may also reduce
the life time or performance of the battery.

Do not use cigarette chargers other than the included cigarette charger to charge the unit.

Store the battery at the temperatures of -20°C ~+50°C / -4°F~+122°F. Higher or lower
temperatures may reduce the capacity and life of the battery or may cause temporary non-
operation.