17
19
18
20
Line up the torch with your workpiece, then
simply pull the trigger to initiate the weld. For
gasless MIG, the drag method is recommended
for optimum weld quality. Release trigger to
end the weld.
For 1kg spool:
Remove spool holder housing
and spring. Place 1kg spool housing inside
the square hole where the spool housing is
removed from. The 1kg housing is found on the
inside of the main spool holder housing.
For 1kg spool:
After removing spool holder
nut, unscrew the 1kg spool bolt located inside
the spool holder housing.
For 1kg spool:
Place 1kg spool over 1kg spool
housing, then tighten and secure with 1kg
spool bolt and nut.
Burnback Adjustment
Burnback Adjustment
Burnback Adjustment
SETUP FOR MIG (GASLESS)
17
Summary of Contents for VIPER 182 Mk II
