10
TRADE SERIES WELDING HELMET
OPERATING MANUAL
Power Supply & Replacing The Battery
The power of the auto-darkening helmet is
provided by solar cells and a CR2450 lithium
battery. To change the batteries, remove
the ADF from the ADF frame. The battery
compartment is on the bottom of the ADF,
open the compartment to replace the battery.
Changing The Inner Lens Cover
Changing The Outer Lens Cover
Pry the inner lens cover up from the finger
groove at the top of the ADF. The inner lens
cover can then slide up and out of the ADF.
Replace with new inner lens cover.
With the ADF frame removed, simply lift out
the existing outer lens cover. Replace with
new outer lens cover.
4/5-9/9-13 CSS 1/1/1/1/379
ANSI CSS Z87 W4/5-13
CSA CSS Z94.3
AS/NZS 1338.1
1
2
3
MEMORY
SHADE
DELAY
MODE
GRIND
SENS.
4/5-9/9-13 CSS 1/1/1/1/379
ANSI CSS Z87 W4/5-13
CSA CSS Z94.3
AS/NZS 1338.1
1
2
3
MEMORY
SHADE
DELAY
MODE
GRIND
SENS.
4/5-9/9-13 CSS 1/1/1/1/379
ANSI CSS Z87 W4/5-13
CSA CSS Z94.3
AS/NZS 1338.1
1
2
3
MEMORY
SHADE
DELAY
MODE
GRIND
SENS.
Summary of Contents for TRADE U21020
Page 1: ...Operating Manual...
