16
RAZOR MULTI 250
OPERATING MANUAL
F02
F03
F04
F05
F06
F07
F08
F09
8. Advanced Settings Menu
PRESS AND HOLD THE ADJUSTMENT KNOB A FOR 5
SECONDS TO ENTER THE ADVANCED SETTINGS MENU
NOTE: SETTINGS MENU IS DEPENDENT ON WHICH WELDING MODE YOU ARE IN.
(CHANGE WELDING MODE TO PARAMETERS YOU WISH TO EDIT)
F01
A
While in this menu you can scroll through the available
settings with the adjustment knob. Each of the different
settings is indicated by a code.
Standby Timer
Input Over-Voltage Protection
Pre-Flow Air Timer (MIG)
Post-Flow Air Timer (MIG)
Pre-Flow Air Timer (TIG)
Post-Flow Air Timer (TIG)
Downslope Time (TIG)
Burnback Voltage
Hot Start Current (MMA)
Slow Wire Feed Speed
Remote Mode Type
0 / 5 / 10 / 15
0 - 2
0 - 5
0 - 5
0 - 10
0 - 5
10-20
0-60
0
0
1
1
2
3
0
1
(minutes) 0 indicates standby mode is off.
(seconds)
(seconds)
(seconds)
(Volts)
(Amps)
(Disabled)
(Wireless)
(1/3 speed)
(Wired)
(1/2 speed)
(2/3 speed)
OFF
ON
RAZOR MULTI 250 Manual APR23.indd 16
RAZOR MULTI 250 Manual APR23.indd 16
6/04/2023 4:01:36 PM
6/04/2023 4:01:36 PM
