Unimig RAZOR ARC 160 PFC, Operating Manual

Page: 15 / 40

15
RAZOR ARC 160/200 PFC
OPERATING MANUAL
8. MMA: Machine Setup
1. For DC+ electrodes, connect earth clamp to the
negative (-) dinse connection, and electrode holder to
the positive (+) dinse connection.
2. For DC- electrodes, connect earth clamp to the
positive (+) dinse connection, and electrode holder to
the negative (-) dinse connection.
3. Connect the plug into a power point, then switch the
machine ON. 4. Ensure that MMA mode is activated on the front panel.