Unimig CUT 55, Operating Manual

Page: 8 / 28

8
R
az
orw
eld
•
2
Ye
ars Warrant
y
U
NIM
IG WARRA
NT
Y
(Po
wer Source on
ly
)
Product Code: KUPJR55
Standard option includes:
CUT55 Machine, T150 Plasma Torch 6m,
Earth Lead 25mm x 4m and Air Regulator.
Technical Data
Power Supply / Phases (V-Ph) 415 - 3 +/- 15%
Duty Cycle @ 40°c as per AS/NZ60974-1 30% @ 55Amps
Rated Power (KVA) 11.0
No Load Voltage (V) 270
Output Current Range (A) Plasma 20-55
Rated Output Voltage (V) 104
Air Flow Draw Off (l/min) 150-220
Air Flow Pressure (Bar) 5-6 (70-87 psi)
Efficiency (%) 85
Power Factor 0.93
Insulation Class F
Protection Class IP21S
Plasma Arc Starting HF
Cutting Thickness - Clean (mm) 20
Cutting Thickness - Severance (mm) 22
Dimensions (mm) 540x220x370
Weight (kg) 21
Warranty 2 years machine only
Certification Approval AS/NZ60974-1
Overview
The CUT55 is an inverter-based Plasma cutting machine produced using the latest in IGBT technology. Low cost and portable this
machine is reliable, robust and stacked with features that you can expect from a quality Plasma cutter. The CUT55 produces a high
temperature plasma stream enabling effortless cutting of all electrically conductive materials including steel, cast Iron, stainless steel,
copper, aluminium brass etc. The CUT55 is equipped with a high quality Plasma torch developed specifically to enhance and improve
the cut quality of the CUT55 machine. Connection of the T150 Plasma torch provides powerful, fast and accurate cutting performance,
additional benefit is the T150 longer life cycle consumable electrodes and cutting tips. The HF start function allows effortless and clean
cut start and stand off cutting, contact cutting is possible by installing the contact cutting torch parts. The CUT55 is an exceptional
machine that is suitable for a wide range of applications including general engineering, fabrication, site work, agricultural, repair and
maintenance services. The CUT55 is packaged with a tough T150 Plasma torch, earth lead and air regulator. The CUT55 gives you the
power and performance to get the job done. Built to our specification and manufactured in compliance to AS/NZ60974-1
Features
• Latest Inverter Technology
• Industrial application
• Safe Euro style torch connection
• Strong metal housing
• Auto protection of over-voltage and over current supply
• Auto protection of short air pressure and thermal overload
• Tolerant to variable power supply
• Suitable to cut all electrically conductive materials
• HF Start
UNIMIG CUT 55
Plasma - 55 Amp Inverter Plasma Cutter
Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium
55 Amp - 20mm Cut on Steel
415v Inverter Plasma Cutter
Industrial Rated, Lightweight and Portable
51851
Circle Cutting Kit
Option
50505-48
Sub-Micronic Cartridge
Option
50500-12
Sub-Micronic Air Filter
Option
04151/CS TORCH
Plasma Torch 12 meter Option