Unimi
Kap
-
Kostnb.
K00717
Dok namn
Produktbeskrivning
Mallens filnamn
Produktbeskrivning.doc
Dok dat
-
Aktuellt filnamn
Produktbeskrivning
– Unimi-1baseHPC
Gäller fr o m
2020-06-08
Rev
02
Godkänd
2014Draft01-
20
Sid
Installation Manual Unimi-1baseHPC
Introduction:
Unimi-1baseHPC is intended for installation of larger rapid charging stations.
By attaching an adaptor element at the top, each Unimi-1baseHPC can accommodate a wide variety of
different chargers.
The upward face and cable inlet of the adaptor element may look different from time to time depending on
station model however the outer rectangular size and attachment pattern towards the Unimi-1baseHPC is
always the same.
Local building codes and regulations always supersede these guidelines and it will be the responsibility of
the installer to install the Unimi-1baseHPC in such a manner that they are not in conflict.
Top of a Unimi-1baseHPC foundation attached with an adaptor for a Tritium 150 kW rapid
charger
