background image

100psi Pneumatic 2 in 1 Nailer 

 

E&OE 

© 2017 Unimac 

12

 

 

 

Some experts believe that the incorrect or prolonged use of almost any product may 
cause serious injury or death. To help reduce your risk of serious injury or death, refer to 
the information below. For more information, see www.datastreamserver.com/safety 

 

Consult all documentation, packaging and 
product labelling before use. Note that some 
products feature documentation available 
online. It is recommended to print and retain 
the documentation. 

 

Before each use, check the product for 
loose/broken/damaged/missing parts, wear or 
leaks (if applicable). Never use a product with 
loose/broken/damaged/missing parts, wear or 
leaks. 

 

Products must be inspected and serviced (if 
applicable) by a qualified technician every 6 
months. This is based on average residential 
use by persons of average size and strength, 
and on a property of average metropolitan size. 
Use beyond these recommendations may 
require more frequent inspections/servicing. 

 

Ensure that all users of the product have 
completed a suitable industry recognised 
training course before being allowed access to 
the product. 

 

The product has been supplied by a general merchandise retailer 
that may not be familiar with your specific application or 
description of application. Be sure to attain third-party approval 
from a qualified specialist for your application before use, 
regardless of any assurances from the retailer or its 
representatives. 

 

This product is not intended for use where fail-safe operation is 
required. As with any product (for example, automobile, 
computer, toaster), there is the possibility of technical issues that 
may require the repair or replacement of parts, or the product 
itself. If the possibility of such failure and the associated time it 
may take to rectify could in any way inconvenience the user, 
business or employee, or financially affect the user, business or 
employee, then the product is not suitable for your requirements. 
This product is not intended for use where incorrect operation or 
a failure of any kind, including but not limited to, a condition 
requiring product return, replacement, parts replacement or 
service by a technician may cause financial loss, loss of 
employee time or an inconvenience requiring compensation. 

 

If this product has been purchased in error when considering the 
information presented here, contact the retailer directly for details 
of their returns policy, if required. 

 

 

 

 

 

 

 

©2017 Unimac. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams 

or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including 

photocopying, scanning or recording, or any information storage and retrieval system, without express permission or 

consent from the publisher. 

Summary of Contents for NAL-FLOOR














Reviews: