Unimac AIRSAWUMCAH16 User Manual Download Page 4

Page: 4 / 12

AIR METAL SAW

Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to
persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure
range as marked on the tool.

Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within
the rated air-pressure range.

2. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such

gases are capable of explosion and serious injury to persons.

Specific Safety Instructions

1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations

that may occur. It must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.

2. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities,

may contain harmful chemicals. Some examples of these chemicals are:

•

Lead from lead-based paints

•

Crystalline silica from bricks and cement or other masonry products

•

Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.

3. Attach all accessories properly to the tool before connecting the air supply. A loose accessory may detach or

break during operation.

4. Obey the manual for the air compressor used to power this tool.

5. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even if a hose

is ruptured.

6. Use this tool with both hands only. Using tools with only one hand can result in loss of control.

7. Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the

tool out of your control.

Item Details

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC