- For washing machine.
Disconnect the inlet hose(s)
from the water tap and let
the water flow out from the
inlet hose(s) and the drain
hose and collect it in a
shallow basin.
- For tumble dryer. Empty
the water container in a
wash basin or, if available,
activate the direct drain
system to let the water
flow out.
5. Fit the locking brackets.
a. Assemble the bolt
C
, spring
washer
D
and flat washer
E
for each bracket.
b. Fit each of the four (4) locking
brackets
A
with the pointed
section facing inwards.
c. Screw in the assembled bolt
only until finger-tight, loose
enough to adjust later.
6. Adjust the appliance feet at a
suitable height to allow them
to slide under the foot locking
brackets.
7. Lift the appliance onto the
pedestal so that the appliance
front feet slide under the foot
locking brackets.
Tighten the bolts securing the
fast locking brackets, ensuring
the bracket is firmly against each
feet of the appliance.
Summary of Contents for ULX110
Page 6: ...Notes...
