4
Operation
Power On/Off
The retrofit fan coil is equipped with an on/off power switch that controls the main power supply to the fan coil. This main power switch is
located on the control box inside the fan coil cabinet. There is also a dedicated switch on your breaker panel to control the main power supply.
• Turn the main power supply on to control the thermostat and provide heating, cooling and ventilation.
• Turn the main power supply off to perform any maintenance.
• The fan coil can be turned off using the thermostat, however, this DOES NOT turn off the main power supply to the fan coil.
Heating
During the heating months, hot water is circulated through your coil. You
can adjust all heat settings with your thermostat. Increase or lower the
temperature with your thermostat. Circulate more hot air through your suite
by increasing the fan speed.
Cooling
During the cooling months, cold water is circulated through your coil.
You can adjust all cooling settings with your thermostat. Increase or lower
the temperature with your thermostat. Circulate more cool air through your
suite by increasing the fan speed.
Ventilation/Fan
Control your ventilation settings year-round with your thermostat. Your fan is
programmed with 3 speeds (low, medium & high) and an automatic setting.
Select your ideal setting with your thermostat.
The automatic setting speeds up or slows the fan down depending
on the temperature difference between the set point and the current
room temperature. Auto is the most efficient and effective fan setting for
home comfort.
Thermostat Control
Please refer to your thermostat user manual for instructions on setup
and operation.
