Creative Solutions, 05-2014
A.
Reciever
Use included cable for connection
B.
Status Output
C.
SET/STORE Button
D.
Status System/Programming
E.
Power supply of output channels
F.
Light output, 3A
Technical Data
MODUL-BLACK.1
MODUL-2-150-2
Receiver side:
4.8-9.6V
4.8-9.6V
Weight (exkl. Cables):
1.5g
8g
Dimensions:
45x14x6mm
45x35x8mm
Current per channel:
3A, up to 16V
1.5A, up to 30V
Maximum current (5s):
5A, up to 16V
3A, up to 30V
galvanic separated:
-
YES
Operation without RC possible:
YES
YES
Light effect with various speed:
11
11
Short circuit protection
YES
-
Deep discharge protection
YES
-
Specials
Start the receiver power while pressing the SET button and keep it for about 10 seconds. Once the blinking
light signal transitions into a running light, the reset has been performed and the default setting is restored.
Safety functions
1.
In case of short circuit or massive overload the output will be switched off immediately. The blue LED will
flash. After 10 seconds pause the controller will try to resume the operation. Maybe you have to restart the
controller.
2.
In case of low battery the output is also turned off. The blue LED is blinking slower. The controller will
continue the operation for two seconds each 10 seconds to show the low battery operation. Please charge!
For more information and further manuals visit www.unilight.at
