EN
- 10 -
4. Filter reset
● After replacing the filter, select the life indicator light corresponding to the replaced filter, press the "water temperature"
button and the "water volume" button for 5 seconds while the indicator light flashes, and the filter life indicator light "PPC"
starts to flash; at this time, click the "water temperature" button, the "PPC" light stops flashing, and the "RO" light starts
to flash; at this time, click the "water temperature" button again, the "RO" light stops flashing, and the "CF" light starts to
flash; at this time, click the "water temperature" button again, the "CF" light stops flashing, and the "PPC" light starts to
flash; repeat in this way.
● When a filter life light is flashing, press the "water temperature" button and "water volume" button for 5 seconds again, and
the filter life light turns white. After the filter life reset is completed, the buzzer will sound for 2 seconds, indicating that the
filter life reset is successful.
Process Flow Chart of Water Purification
Municipal tap water
Booster pump
PPCF
Reverse osmosis
membrane filter
CF
Purified water
container
Heating body
High temperature
purified water
Normal temperature
purified water
Raw water
container
Waste water
container
Note: The above flow chart of water treatment is for reference only, and the real product shall prevail.
rejected water
