Uniks EVSE X7, Quick Start Manual

Page: 8 / 16

8
The instrument may only be
used within the operating
ranges as specified in the
technical data section.
Avoid any heating up of the
instrument by direct sunlight
to ensure perfect functioning
and long instrument life.
The opening of the instrument
for fuse replacement, for
example, may only be carried
out by professionals. Prior to
opening, the instrument has to
be switched off and
disconnected from any current
circuit.
The instrument may only be
used under those conditions
and for those purposes for
which it was conceived. For
this reason, in particular the
safety references, the
technical data including
environmental conditions and
the usage in dry
environments must be
followed.
When modifying or changing the
instrument, the operational safety
is no longer ensured.
Testing
Purpose of the EVSE X7 accessory
The UNIKS EVSE X7is an accessory
to
support all relevant
measurements of a Multifunction
Tester (MFT) to simply wire
between the EVSE charging point
(Type-2 connector) and the
measurement inputs of the MFT.
All wires of the charging
connector are available: L1, L2,
L3, N, PE, CP and PP.