
A
PPLICATIONS
MP3 Music Jukebox:
Internet Radios:
Car MP3 Player:
Transmit your MP3 music files or any other audio from
your computer to your home stereo system or FM radios around the house or
office.
Transmit internet radio stations from your computer to
standard FM radios around the house or office.
Transmit audio from your portable computer to your car stereo
system without complicated wiring
And many more ...
After a few seconds your computer should recognize the transmitter as a USB
audio device and should automatically configure a standard driver for it.
You can now set the transmitting frequency by setting the “FREQ” DIP switch
on the transmitter according to the following diagram.
Note that the unit
comes factory pre-set to High-Band mode of operation.
Open your favorite music playback application and play something in order to
test the transmitter. Make sure the volume level on your computer is set to
around medium.
Extend the transmitter's antenna fully and put it in the upright position. Now
tune any nearby FM radio to the frequency selected and listen to the audio.
Note that immediately after changing the frequency using the DIP switch, it
may take a few seconds for the transmitter to lock-in to the newly selected
frequency.
You should adjust the volume level on the computer so that you have a strong
distortion free reception. Setting the computer volume too high may distort
the transmitted signal and setting it too low will weaken the output power.
I
NSTALLATION
1.
Make sure your computer is turned on and has finished starting the operating
system. Then connect one end of the USB cable to a free USB port on your
computer and the other end to the USB port on the transmitter. Make sure of
the correct orientation of the cable.
Once the transmitter has been fully recognized by the operating system the
“On Air” LED on the transmitter will light up indicating the transmitter has
been successfully detected and is now operational.
2.
3.
4.
You must choose a
frequency on which no other commercial station is broadcasting.
5.
6.