Unika RACK POWER, User Instructions

Page: 4 / 8

page 3
RACK POWER
U S E R I N S T R U C T I O N S
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
INPUT VOLTAGE LOAD CURRENT
SEQUENCE
DELAY
2.0 3.0
4.0 1.0
SECONDS
MAXIMUM LOAD
AC~220V 50Hz
MAX 30A
LINE
AC~220V 50Hz
MAX 30A
UNiK A
RACK POWER
Po w e r S e q u e n c e r
220 00.2
POWER
BREAKER
OFF ON
ON
1. Power Switch: Press this POWER push button to initiate the sequence to turn on the outlets in order from CH1 to CH8
when sequencing on, and turn the outlets off in the reverse order from CH8 to CH1 when sequencing off.
2. Outlet Circuit: These 8 LED's indicate the status of circuit from CH1 ~ CH8.
3. Output Load Current: This large size of LED display indicates output load current.
n d
4. High Current Outlet: User can easily to use the plug (figure-1) for safety connection to the 2 RACK POWER
or other device.
5. High Current Inlet: User can use the connector (figure-2) for safety connection to the mains input power.
6. Circuit Breaker: This is a 30A fast acting main circuit breaker for the device's power ON/OFF control and it also
serve as current overload protection.
7. Input Voltage: This large size of LED display indicates input voltage.
8. Sequence Delay: The 8 AC outlets on the rear panel are able to sequentially power on or power down. The sequence
delay interval is user-adjustable from 0.4sec to 5sec via the trimpot on the front panel.
9. AC Mains operating voltage 120Vac/60Hz or 220Vac/50Hz single Phase, Mains operating voltage of the device need
to be specified upon order.
(Figure-1)
(Figure-2)
1 2 3 4 5
6 7 8 9
Front Panel