UNiKA DI-BT
User Guide
7
Bluetooth Pairing
Once the DI-BT Box is power ON, 2 LEDs on the top of the unit will illuminate,
at this point you can turn the RESET switch to the ON position and the DI-BT
Box will be available to pair with Bluetooth devices, check the available devic-
es on your Bluetooth enabled playback source; the DI-BT Box should appear
in the list, select the DI-BT Box, your playback device will be paired and the
DI-BT Box automatically converts the streaming audio to analog for connec-
tion to audio systems.
1. Make sure the DI-BT Box volume control is turned fully counter clockwise.
2. Enable Bluetooth pairing on your Bluetooth enabled device.
3. Connect your DI-BT Box to USB power and turn ON the unit.
4. Turn on the DI-BT Box RESET switch to enable Bluetooth pairing.
5. Red and Blue LED’s will alternate showing the DI-BT Box is in search
mode for pairing.
6. Your Bluetooth device will identify the DI-BT Box in the Bluetooth devices menu.
7. Select the DI-BT Box in your Bluetooth devices menu.
8. Once your Bluetooth device has paired with the DI-BT Box, the blue LED
will light up constantly, when audio is playing, the blue LED will flash
every three seconds.
9. Once your Bluetooth device has been paired to the DI-BT Box, the DI-BT
Box will automatically pair to the same Bluetooth device when the DI-BT
Box is turned back on in range.
Going out of range
If your Bluetooth device goes out of the range of your DI-BT Box (greater than
10 meters), the device playback will pause and the blue LED on the DI-BT Box
will stop flashing to show the unit is in ‘Stand-by’ mode. Once the device is
back in range, the DI-BT Box will automatically reconnect to continue playing
back audio from your Bluetooth device. Stand-by mode will not allow another
Bluetooth device to pair with the DI-BT Box. If your Bluetooth device goes out of
range from the DI-BT Box for more than two minutes, or if you want to connect
Summary of Contents for DI-BT
Page 12: ......
