Unika Color Products Ltd. Unika House New York Way New York Industrial Park Newcastle Upon Tyne NE27 0QF Helpline Tel: 0191 2597876
BUDGET DIY JIG
Page 1: ...Unika Color Products Ltd Unika House New York Way New York Industrial Park Newcastle Upon Tyne NE27 0QF Helpline Tel 0191 2597876 BUDGET DIY JIG...
Page 2: ...tioned it must be clamped in place using two C clamps Before cutting check the pegs are still in contact with the worktop Certain types of clamp if over tightened can cause the jig to creep out of pos...
Page 3: ...1 2 3 MEASURE DISTANCE BETWEEN MITRE CUTS B ABOVE 4 CUT MALE MITRE ON RIGHT HAND END OF W TOP 3 5 DRAW LINE C LINE C IS LENGTH B MINUS 193mm FROM MALE CUT 6 SET JIG ON LINE C AS SHOWN BELOW AND CLAMP...
Page 4: ...T HERE FEMALE BOLT SLOTS SET UP WORKTOP BACK Postformed Edge BOLT SLOTS IN RIGHT HAND FEMALE WORKTOP BACK BOLT SLOTS IN LEFT HAND FEMALE Postformed Edge PEG PEG PEG PEG PEG PEG MALE BOLT SLOTS SET UP...
