UNIHOMS S8E, Product User Manual

Page: 8 / 21

Chapter 4 Installation instructions
● Turn off the main power in the electricity box and confirm
the fire wire is not alive with a test pencil.
● Remove the base of the smart panel and install it in the wall
box (as shown in the pictures following).
● Check the wires and make sure the wires are in good
contact with the terminals and no exposed cooper wires.
● Fasten the base to the wall box with mounting screws and
fix the smart panel back to the base.
● Note that the screws should not be fixed too tight during
installation in case any deformation or damage to the screen
and hardware.
● If your smart panel is not flat after installation, do not press
the screen violently, please check the wall box and the base
installation at first.