UniGuard Technology Limited
15
6.3 Shock sensor sensitivity configuration:
The sensitivity of the built-in shock sensor has three different level:
First level: Alarm will be triggered after detect slight vibration, send command"
senspspace+1" .
Second level: Alarm will be triggered after detect 8 times vibration in 2 seconds,
send command" senspspace+2".
Third level: Alarm will be triggered after detect 25 times vibration in 5 seconds,
send command" senspspace+3".
7. SOS
Long Press the SOS button for 3 seconds, the tracker device wil
l send SMS “help
me!+lat./long. to all the authorized numbers in 3 minutes interval. It will stop
sending SMS “help me” when received a reply from any one of the authorized
numbers.
8. Low power alarm
When the built-in battery capacity is below 15%, track
er will send SMS “low
lat./long information to the authorized numbers for 2 times for each 20
minutes. And it will stop sending alarms if external power is connected to charge.
V. GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS. Please setup according to following steps
1. SETTING UP APN
Send SMS “APN+pspace+APN”, the tracker will reply “APN OK” is
succeeded. For example: Send SMS “ APN123456 CMNET”.
Note: CMNET is the APN of china GSM network, the APN varies with different
GSM network operator in different countries, please check with your local GPRS
network operator to get the correct APN.
2. GPRS USER NAME AND PASSWORD SETUP
In most countries, the user name and password involving GPRS login are not
compulsorily necessary, therefore, the entry can be skipped. For those countries
requiring user name and password, please configure as following:
Send SMS “up+pspace+user+space+password”, If succeeded, tracker
will reply “user, password ok!”, for example: send SMS “up123456 jonnes 666666”
Note: 123456 is password of tracker, jonnes is the user name for GPRS login,
666666 is the password for GPRS login.
