UniGuard Technology Limited
- - www.uniguardgps.com
5
3.
Send command
DW030
immediately once device is turned on
. (Reply is
GPS Time Set OK!) Otherwise device will go to sleep mode in 4 minutes.
By sending this command, you have 30 minutes operation time. After 30
minutes, device goes to sleep mode.
4. In 10 to40 seconds, the unit starts to work and acquire the GSM signal as
well as GPS signal. The indicator will keep flashing every 3 seconds once
the unit has received both signals. After 4 minute, the device will go to
sleep mode. (LED OFF and Device OFF)
4 SMS Operation Instruction
4.1 Set Admin phone number
Message format:
admin123456 0086*****
(There is a space between
password and phone number)
Example : admin123456 008615012404563
Reply :
‘admin OK !’
When admin number calls device SIM, device will return current location,
GPS valid(V:A) or invalid (V:V), time, speed, battery state, ID, SIM operator,
and GSM base location information. As below :
http://maps.google.com/maps?q=22.68375%2c113.93973
V:A,2015-03-29
17:18:04 S:000km/h,Bat:6,4209800875,S25G00;p:46000, l:10352, c:4293
Remove the admin number
