UniGuard GT06L, User Manual, Page: 5 / 6

5
UniGuard Technology Limited
7 Command List
Note: All Alarms only will be sent to admin Number
Command Function
apn123456 APN APNname APNpassword Set APN
adminip123456
www.gpspos.net
8000 Set IP Port
password123456 888888 Change password
smslink123456 google link
fix020s060m***n123456 Set upload interval
ANGLE123456 30 Set angle change upload interval
acc123456 ACC ON OFF alarm
noacc123456 Cancel ACC ON OFF alarm
acc123456 1 Activate ACC ON alarm via speaker
acc123456 0 Cancel ACC ON alarm via speaker
quickstop123456 fast cut fuel
noquickstop123456 Cut fuel based on speed less than 20km/h
stop123456 Cut fuel based on speed less than 20km/h
resume123456 resume fuel
arm123456 Set arm mode when ACC OFF
disarm123456 Cancel arm mode
silent123456 Silent mode(speaker no sound but SMS alarm)
move123456 0200 movement alarm(200meters)
nomove123456 Cancel movement alarm
vibrate123456 1 Activate vibrate alarm(alarm speaker beep 5s)
vibrate123456 0 Cancel vibrate alarm
sensitivity123456 1 Set vibrate level 1
sensitivity123456 2 Set vibrate level 2
sensitivity123456 3 Set vibrate level 3
sleep123456 on GSM/GPS sleep when vehicle stopping
sleep123456 off Cancel sleep mode
suppress123456 Activate GPS drifting control
nosuppress123456 Cancel GPS drifting control
check123456 Check device parameters
IPAPN123456 IP APN Check
reset123456 Reset device
KC123456 0 Cancel alarm
KC123456 1 GPRS alarm (default)
KC123456 2 GPRS+sms alarm
KC123456 3 GPRS+sms+call alarm
admin123456 15018500598 Set admin number
noadmin123456 15018500598 Delete admin number
begin123456 Back to factory settings