Unigraf UCD-2 VX1, User Manual

Page: 10 / 23

10
Device chaining
Two or more UCD-2s can be chained together for capturing more than 8 lanes. The
connection is done with a synchronizing cable as shown in the figure below. Figure in the
following page shows the intended V-by-One connections in a chained configuration.
When chaining devices, please pay attention to the following:

Device chain must not form a ring.

Both ends of the cables should always be connected to a device.

All devices must be connected to the same computer via USB cables.

LOCKn and HTPDn must be connected to correct devices for reliable operation.

Please not that connecting the lanes incorrectly does not prevent capturing but will only
affect visible video.