CLEANING AND MAINTENANCE
1. Fill the bladder with warm water (not so hot that it can scald you), add a cleaning tablet (or your home cleaning ingredients), seal it up and shake it.
2. Lift the reservoir up, letting the tube drape into the sink; then pinch open the bite valve until you see water flowing out of it. This ensures the entire
reservoir system is in contact with the cleaning solution.
3. Set it aside and let soak. If you have reservoir-cleaning tablets, the instructions typically call for it to sit for five minutes; if you're using a mixture of
household ingredients, wait about 20 minutes. Then drain the system.
Unigear Hydration Bladder is an extremely durable product and is built for years of use. However, some basic maintenance will help ensure your
reservoir lasts a lifetime.
4. Fill the bladder and tube with a mixture of warm water and scrub the interior of the bladder; then scrub the interior of the tube. It will be much
easier if you remove the bite valve, which you can scrub separately.
5. Thoroughly rinse everything with clear water.
6. Hang your bladder to air dry in a well-ventilated area.
Plug-in Connector with O-ring Gasket push-lock
Summary of Contents for Hydration Bladder
Page 1: ...R ...
