PART I: INSTALLATION MANUAL
12
Performance Curves
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C
Fan installation
ATTENTION! The bellows unit provided is made of canvas and is provided with blocking spacers to avoid
breaking it during installation: first place the bellows unit between flanges, then remove the spacers. Canvas has
to be stretched after the installation, but not stressed.
ATTENTION! the air duct dimensioning must be perforformed according to the flow rate, the temperature, the
distance between the fan and the burner and according to the fan features as well..
ATTENTION! It is suggested to install the fan on vibration-damping supports in order to reduce vibration
propagation.
TP525A
TP520A
TP515A
TP512A
TP93A
TP92A
TP90A
TP91A
0
2000
4000
6000
8000
10000
12000
14000
16000
Campo di scelta bruciatore
Output diagram (air temperature = 15°C)
Burner performance range
TP525A
TP520A
TP515A
TP512A
TP93A
TP92A
TP91A
TP90A
Connect the air duct to the burner by means of the bellows unit provided together with the burner (see the
picture below).Install the bellows units provided as explained on pages 13-14.
