Unigas PN1025, Manual Of Installation - Use - Maintenance

Page: 88 / 99

submenu
CnF - configuration parameters group :
Menu Parameter Description Additional description Min Max Default U.M.
Visibility
condition Password
level Modbus
index
CnF CONFIGURATION
0
AI1 Analog Input 1 1
A1P Probe 1 Presence
This parameter enables or disables the
probe 0 1 1 2 1
A1C Calibration Probe 1 Don't modify it -20,0 20,0 0,0 °C A1P >0 3 2
AI2 Analog Input 2 1
A2P Probe 2 Presence
This parameter enables or disables the
probe 0 1 1 2 3
A2C Calibration Probe 2 Don't modify it -20,0 20,0 0,0 °C A2P >0 3 4
AI3 Analog Input 3 1
A3P Probe 3 Presence
This parameter enables or disables the
probe 0 4 1 2 5
A3L Min. Value conversion AI3 Don't modify it -999,9 999,9 0,0 A3P >2 3 6
A3H Max. Value conversion AI3 Don't modify it -999,9 999,9 30,0 A3P >2 3 7
A3C Calibration Probe 3 Don't modify it -20,0 20,0 0,0 °C A3P >0 3 8
AI4 Analog Input 4 1
A4P Probe 4 Presence
This parameter enables or disables the
probe 0 4 1 2 9
A4L Min. Value conversion AI4 Don't modify it -999,9 999,9 0,0 A4P >2 3 10
A4H Max. Value conversion AI4 Don't modify it -999,9 999,9 30,0 A4P >2 3 11
A4C Calibration Probe 4 Don't modify it -20,0 20,0 0,0 °C A4P >0 3 12
dI Digital input 1
dI1 Input 1 polarity (Pump) Change type of digital input ( NC o NO) 0 1 1 3 13
dI2 Alarm polarity from input 2 Change type of digital input ( NC o NO) 0 2 2 2 14
dI3 Alarm polarity from input 3 Change type of digital input ( NC o NO) 0 2 2 2 15
dI4 Alarm polarity from input 4 Change type of digital input ( NC o NO) 0 2 2 2 16
dI5 Alarm polarity from input 5 Change type of digital input ( NC o NO) 0 2 2 2 17
dI6 Alarm polarity from input 6 Change type of digital input ( NC o NO) 0 2 2 2 18
dI
Digital output
Alarm and Warning 1
dO5 Polarity output Warning Change type of digital input ( NC o NO) 0 1 0 3 19
dO6 Polarity output Alarm Change type of digital input ( NC o NO) 0 1 0 3 20
SIC Safety probe 1
SIp Selection of safety probe
Probe which also activates the relay
Warning (ns. KTRS) 0 4 4 3 21
SyS Syistem 0
dSA display A output
Probe temperature or set-point to be
displayed in the left display 0 8 1 3 22
dSb display B output
Probe temperature or set-point to be
displayed in the right display 0 8 3 3 23
PAS Password 1
PL1 Password level 1 0 9999 0 1 32
PL2 Password level 2 0 9999 2 33
PL3 Password level 3 0 9999 3 34
COD. M12924CA Rel. 0.5 03/2016