Unigas PG70, Manual Of Installation - Use - Maintenance

Page: 13 / 56

CIB UNIGAS - M039191CA
13
Key
1 Pressure governor
2 Pressure /vacuum gauge port to measure inlet pressure/vacuum
3 Pressure gauge port
5 Suction
7 To nozzle
8 Return
Connecting the light oil flexible hoses
To connect the flexible light oil hoses to the pump, proceed as follows, according to the pump provided:
1
remove the closing nuts
A
and
R
on the inlet and return connections of the pump;
2 screw the rotating nut of the two flexible hoses on the pump
being careful to avoid exchanging the inlet and return lines
: see
the arrows marked on the pump that show the inlet and the return (see prevoius paragraph).
Suntec TA..
Oil viscosity 4 - 450 cSt
Oil temperature 0 - 140°C
Min. suction pressure - 0.45 barto avoid gasing
Max. suction pressure 5 bar
Max. return pressure 5 bar
Rotation speed 3600 rpm max.
Danfoss KSM..
Oil viscosity 2,5 ÷ 450 cSt
Oil temperature -10 ÷ 160 °C
Max. suction pressure 4 bar
Min. suction pressure -0,45 to avoid gasing
Max. return pressure 4 bar
Rotation speed 3450 rpm max
Suntec AJ6 Suntec J6 Danfoss RSB30
Danfoss KSM Suntec TA
R
A
R
A
R
A
R
A
R
A