Unigas IDEA LG550, Manual Of Installation - Use - Maintenance

Page: 18 / 57

PART I: INSTALLATION
18
6 Take the gas pipe TR off and put it in the new position fixing the screws VT1 and VT2VT1 VT2 (Fig. 15).
7 Unscrew the V , rotate the head of 180 ° along its axis as shown in( Fig. 16), until the hole F is found. Fit the screw again(Fig. 16 -
Fig. 17).
8 ( Fig. 18)Insert again the flange and the combustion head together
9 ( Fig. 18)Rotate the disc D following the instructions below.
10 Take off the screw VF . ( Fig. 18)
11 Rotate the disc D for 180 ° and then fit the screw VF ( Fig. 19).
12 Reconnect CR and CA .
13 Retighten the screws V1 , V2 , V3 , V4 , VT1 e VT2
14 Place again the rod T into its own position and fasten it by the platic hook G .
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18: Old position Fig. 19: New position
V1
V2
V3
V4
S1
S2
T
VT1
VT2
TR
G
V5
CA
CR
LOCKED
G
UNLOCKED
G
VT2
VT1
TR
F V
D
VF
TR
D
TR
VF