12
Description
Case
The plastic cover parts are made of durable PC/ABS material.
The WLAN Handset has the enclosure protection IP44, and fulfills IEC 60068-2-32, procedure 1,
which makes it drop proof from 1 meter onto concrete. Ascom approves 12 drops from 1.5 meter.
Antenna
The antenna is integrated inside the handset.
Display
The display is an illuminated 28 x 35 mm, TFT display.
Keypad
While not in use, the keypad should be locked to prevent accidentally pressing a key.
8
Five-way navigation key
Navigation key with Left, Right, Up, Down, and Confirmation (in the middle). It is also pos-
sible to program these keys for short cuts, except the middle key. The Up is by default a
short cut to the Inbox, and Down is a short cut to Call contact. See also
9
Voice mail access
A quick access to the handset’s Voice mail by long press. See also
10
Key lock and upper/lower case
Combined key lock to lock the keypad and upper/lower case. This key locks the keypad in
combination with the soft key “Lock”. This key also switches between upper/lower case and
digits.
11
Microphone
12
Space
To add space between text.
13
Sound off key
To turn on/off audible signals in standby mode, or silence the ring signal for an incoming
call. During a call, a long press on the key/button changes between microphone on/off. This
button has the same function as (5) Mute button.
14
Tactile indicators
There are two tactile indicators to indicate the center of the key pad.
15
End key and On/Off
Combined button; to end a call, to return to standby mode, and to switch the handset on/off
by long press.
16
Color display
The full graphic type display is 176 pixels wide and 220 pixels high. The display has multiple
colors and backlighting.
17
Headset connector
The headset connector is used to connect a headset. It is protected against dust by using
the headset connector cover.
18
LED
Indicates incoming call, messaging, low battery, and charging.
1
This feature is system dependent.
