Menu Operation
c10_WL3.fm
Messaging
A31003-M2000-U107-1-7619, 1/2017
82
WL3 and WL3 Plus WLAN Handset, User Manual
Up to five predefined messages can be configured for the handset in the
WinPDM/Device Manager. This lets the user select and send a message
appropriate to the current situation, such as "I am in a meeting" or "I am in the
operating theatre".
How to use the WinPDM/Device Manager to create store predefined messages
the handset is described in the Message Templates section in the Configuration
Manual for the handset.
Before a message is sent, the user may edit, add, or remove text from the
message. For example, the message "I am in a meeting" could be appended with
" - please call back after 1500".
The message template function can be used in the following contexts:
•
When a call is received that the user wishes to decline, but still acknowledge
with a message, without having to type a completely new message. See
Decline a Call with a Predefined Message
•
When a text message is received that the user wishes to answer with a text
message without having to type a completely new message. See
Answering a Text Message with a Predefined Message
•
When the user is writing a message using the handset Messaging function
without having to type a completely new message. See
10.4.2.1 The Templates Menu
To access a template and use it in one of the ways described above, perform the
following steps:
1. Open the "Templates" menu as described in the context in which the template
is being used.
2. Select the required message from the "Templates" menu.
3. To edit the message, use the handset navigation key to move to different
parts of the message, the handset key pad to add additional text, and the
"Clear" soft key to delete unwanted text
10.4.3 Write and Send a Message
A message can be constructed from scratch, or from a predefined template that
can be used as it is or edited. The maximum message length is normally 1024
characters but may be less depending on the character set used.
