Administration
19
Administration
This chapter describes the configuration of every parameter available on the OpenStage 60 T/80
T local admin menu.
The telephones OpenStage 10 T, OpenStage 15 T, OpenStage 20 T and OpenStage 40 T can’t
be administered via local Menu but only by the communication platform.
To customize the free programmable keys on the telephones OpenStage 10 T, OpenStage 15 T,
OpenStage 40 T and OpenStage 60 T/80 T see User Manual.
Access via Local Phone
1. Access the Administration Menu
OpenStage 60 T/80 T:
Press the
v
key repeatedly until the "Settings" tab is displayed.
Select the "Admin" entry and confirm with
i
.
OpenStage 15 T / 20 T / 30 T / 40 T:
Press the keys
D
,
l
, and
i
consecutively to select the administration menu.
2. Enter Password
When the Admin menu is active, you will be prompted to enter the administrator password. The
default admin password is "123456". It is highly recommended to change the password (see
Section , "Password") after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode. For changing the mode, press the # key once or
repeatedly, depending on the desired character. The # key cycles around the input modes as
follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
3. Navigate within the Administration Menu
OpenStage 60/80
Use the TouchGuide to navigate and execute administrative actions in the administration menu.
The data entered in input fields is parsed and controlled by the phone. Thus, data is accept-
ed only if it complies to the value range.
Press the
m
key briefly:
- scroll up
Press the
l
key briefly:
- scroll down
Press the
g
key:
- open a context menu
Press the
h
key:
- cancel a function
Press the
i
key:
- confirm entries
Run your finger around the
sensor ring
W
- browse lists and menus
- set up volume
