Unify OpenScape WLAN Phone WL4 User Manual Download Page 14

Page: 14 / 83

Handset Description

Alphanumeric Keys

Sound off

Indicates that all the signals have been muted. The icon

appears in the Status bar when the Sound off key or Mute

button is pressed and hold.

Silent volume

Indicates that all the signals have been muted. The icon

appears in the Status bar when the Volume down but-

ton is pressed and hold or if the Silent mode is set on the

handset using the WinPDM/WSG DM.

Bluetooth

Indicates that Bluetooth is enabled. The icon appears in

the Header bar.

Bluetooth headset

Indicates that a Bluetooth headset is connected to the

handset. The icon appears in the Header bar.

Headset

Indicates that a corded headset is connected to the hand-

set. The icon appears in the Header bar.

Key lock

Indicates a locked keypad. The icon appears in the Status

bar.

Phone lock

Indicates a locked handset. The icon appears in the Sta-

tus bar.

Man-down alarm

Indicates that the Man-down alarm function is enabled.

The icon appears in the Header bar.

No-movement alarm

Indicates that the No-movement alarm function is en-

abled. The icon appears in the Header bar.

Profile active

Indicates that a profile is active. The icon appears in the

left lower part of the Active area.
NOTE: If any error or warning message appears on the

handset’s display, the icon will be moved to the Header

bar.

Handset model Mes-

saging

Indicates that the handset is a OpenScape WL4 Messag-

ing. The icon is located in the right part of the Active area.

Handset model Plus

Indicates that the handset is a OpenScape WL4 Plus. The

icon is located in the right part of the Active area.

Alphanumeric Keys

Alphanumeric keys consist of numbers, letters and other special characters.

A31003-M2000-U109-01-7619, 29/04/2020

OpenScape WLAN Phone WL4, User Manual

Summary of Contents for OpenScape WLAN Phone WL4




















































































Search results

Summary of Contents for OpenScape WLAN Phone WL4

Reviews:

Related manuals for OpenScape WLAN Phone WL4

Brands by name

Popular brands

Unify OpenScape WLAN Phone WL4, User Manual

Search results

Summary of Contents for OpenScape WLAN Phone WL4

Reviews:

Related manuals for OpenScape WLAN Phone WL4

Brands by name

Popular brands