44
Consultation
Call waiting
You need to speak to a user in your communications system urgently, even
though this user's line is busy. You can send a call waiting signal during the call
to let the user know you want to talk to him or her. The user either answers
immediately or you will be automatically connected when he or she has finished
his call.
This function is only available if it has been configured by the service engineer.
The user is busy. You want to use call waiting.
p
Wait until the message "Camp-on" appears on the display (ringing tone).
You receive a call waiting signal (second call)
You are still available to other callers, even though you are on the telephone.
The call waiting signal informs you of the second call while you are conducting
a call. You can answer this call without ending the first call.
p
You are on a call and hear a call waiting signal.
If you want to answer the second call, you can either place the first call on hold
(the first caller waits) or end the first call.
Placing the first call on hold and answering the second call
Answer the second call.
Talk to the second caller. The first caller waits. His or her call is on hold. You
can now:
• Toggle between the two callers
• Set up a conference
Ending the second call
Either:
Open the system menu.
s
t
w
Select the menu item and confirm.
Or:
a
Press the End call key. The following message appears on the display:
"Recalling". Your phone rings.
Press the Talk key to talk to the first caller again.
Ending the first call
Press the display key to switch to the first caller.
a
Press the End call key. The first call is ended. Your phone rings.
Press the Talk key and answer the second call.
2ndCall
Menu
Quit and return?
Toggle
