12
Connect the Telephone
If your LAN does not have PoE (Power over Ethernet; ask your admi-
nistrator), then you need to use a power supply.
Insert the power supply plug into the Power jack
on the base of
the telephone.
To prevent damage to the telephone, the power supply must only be
plugged into the Power jack
.
Desk Installation
For desk installation insert the LAN cable into the Network jack
on the base of the telephone.
Wall Installation
1.
Connect the LAN cable with the net-
work jack
on the base of the tele-
phone and the wall jack.
2.
Slide the L-shaped bar of the telepho-
ne from top down along the guide
rails of the stand until it locks in place.
Optional Connections
: LAN connection to PC
: Connection to Headset
If further settings are required for correct operation of the telepho-
ne, please contact your administrator.
L-Bars
KBA.book Seite 12 Freitag, 11. April 2014 10:28 10
