Call forwarding
77
Call forwarding
Depending on the settings made by administrator, standard call forwarding may
be configured for the phone or alternatively a call forwarding by type option that
is supported by OpenScape Voice
Standard call forwarding
You can forward calls for your phone to another phone. You can also change,
activate and deactivate call forwarding during a call. The
Forwarding
function
must be approved by the administrator.
Three forwarding conditions can be programmed in the forwarding menu:
• Unconditional
• Busy
• No reply (after {1}s)
Because of its direct impact, "Unconditional" call forwarding has the highest pri-
ority followed by "No reply" and "Busy".
If active, "Unconditional" call forwarding is indicated on the graphic display when
the phone is idle.
Forwarded calls can, if permitted, be logged in a call list
The
Forwarding
menu offers you three types of call forwarding.
Unconditional
g
Destination phone number
Busy
g
Destination phone number
No reply (after {1}s)
g
Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, a Destination could then be Destination 12345 for example.
Using call forwarding
The following functions are available for activating and deactivating call forward-
ing and configuring it in accordance with your requirements:
• ”Activating or deactivating immediate call forwarding”
• ”Saving destination phone numbers for call forwarding”
• ”Copying and pasting destination phone numbers”
• ”Assigning a destination phone number for call forwarding”
• ”Activating/deactivating call forwarding”
”Defining the ring duration before call forwarding on no reply”
On multi-line telephones
Page 14, you can only configure call forward-
ing for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type
