Unify OpenScape CP700 User Manual Download

Page: 191 / 243

191

Using a different phone for a call in the same
way as your own

Your phone can be temporarily used by others for an existing call, as if it where
his/her own.

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey.

€

Select "PIN and Authorization".

Confirm.

€

Select "Temporary Phone".

Confirm.

Enter phone number of the other user.

Enter the other user's code.



page 182.

if needed

If the other user has still not set a personal code, he/she is asked to do this on
his/her phone.

Dial external number.
After the end of the call, this status is removed again.

Service/Settings

Service Menu

PIN and Authorization

Temporary Phone

Change PIN

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands