Unify OpenScape CP700 User Manual Download Page 182

Page: 182 / 243

182

Saving personal lock code

For the functions
• Locking the phone to prevent misuse



page 180

• Using a different phone in the same way as your own



page 191

in order to assign, you must enter a personal code (PIN) which you can define
yourself.

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey

€

Select "PIN and Authorization".

Open with the Softkey.

Confirm.

Request for current PIN.

Enter the current 5-digit PIN.
If you have not assigned a PIN as yet, use the default one: "00000".

Request for new PIN.

Enter the new 5-digit PIN.

Request for re-entering the new PIN.

Re-enter the new code.

Service/Settings

Service Menu

PIN and Authorization

Change PIN

Old PIN:

New PIN:

Re-enter PIN:

If you have forgotten your code, contact the relevant Administrator for
help. Your PIN can be reset to the default one: "00000".

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands