Unify OpenScape CP700, User Manual Hfa

Page: 182 / 219

182 Other settings and functions
Watching a video stream through a camera
You can open a video stream by using a camera e.g. from the door phone and
watch a real-time video on your CP700/700X telephone device, when the admin-
istrator has configured your device. This enables you to monitor your place.
The telephone can control up to four different cameras, but only one of them can
be used at a time. Multiple telephone users can watch the video simultaneously.
How to program a camera
Example: Programming your door phone’s camera
Prerequisite : Direct Video has been enabled by your administrator.
At first you have to set up a programmable key for the activation/ deactivation of
the camera.
Hold down the Function key in the left panel or on a connected OpenScape Key
Module 600 to which you want to assign the camera until the programming
prompt is displayed.
or
If you want to use a Function key in the Favorites menu:
@
Press the Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Press and hold the Function key to which you want to assign the camera.
€
Select "Assign local feature".
Confirm.
Confirm.
Confirm. The key is programmed.
See also at

page 95 that explains how to set up a local feature.
How to activate/ deactivate the camera
Prerequisite : Direct Video has been enabled by your administrator.
When you have configured a programmable key for the camera in the left panel
or on a connected OpenScape Key Module 600 , you can press the relevant key
to turn the camera on.
or If you have used a Function key in the Favorites menu:
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature -
_
Direct Video -
_
Camera 1
Q _
_