manualshive.com logo in svg

Unify OpenScape CP600, User Manual

Share
Download
Unify OpenScape CP600 User Manual Download Page 109

109

Line mailbox

Callers who wish to reach you while you are away can leave a callback request 
in the mailbox of the relevant line.
In the mailbox you will also find voice or fax messages from the mail server (if 
configured).

Requirement

: A mailbox has been configured for one or more lines.

Please take note that only one user at any one time can work with the same mail-
box.

Retrieving messages

If there are new, as yet unqueried entries in the mailbox and a programmable 
function key has been equipped with the “Mailbox” function, the LED lights up 
this key.

Also take note of the information on 

page 17.

Press the “Mailbox” function key.

Information on the caller is displayed 

page 17.

Carrying out a callback request

A callback request is displayed.

Select and confirm. The participant is called on the relevant line.

Next entry

There is more than one entry.

Select and confirm. The following entry is displayed.

Deleting mailbox entries

The relevant entry is displayed.

Select and confirm.

Ending mailbox query

@

Press key.

or

Select and confirm.

Entries in the mailbox which are not deleted remain saved. If there are as yet 
unqueried callback requests, the programmed “Mailbox” function key continues 
to light up.

If your phone belongs to an ONS group (parallel calls 

page 134), please 

note the following special features: signaling in the mailbox (MWI) is avai-
lable to all phones of an ONS group.

Mailbox

_

Start?

f

Next entry?

f

Delete?

f

Cancel?

f

Summary of Contents for OpenScape CP600





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands