Unify OpenScape Cordless Enterprise User Manual Download Page 10

Page: 10 / 80

Setting the display language

Press and

hold

the End call key

The telephone is now ready for use.

Attaching the belt clip

The handset has notches on each side for attaching the belt clip.

•

Attaching the belt clip:

Press the belt clip onto the back of the

handset so that the tabs on the belt clip click into place in the
notches.

•

Removing the belt clip:

Press the centre of the belt clip firmly

with your right thumb.

Push the nail of your left thumb up

between the clip and the casing.

Slide the clip upwards to

remove.

Connecting the headset

Connect the headset with 3.5 mm jack to the left side of the handset

Connecting the USB data cable

For data exchange between the handset and PC:

Connect the USB data cable with micro-USB plug into the USB
socket at the bottom of the handset

Connect headset via Bluetooth

Connect the handset

directly

to the PC,

not

via a

USB hub.

Summary of Contents for OpenScape Cordless Enterprise

















































































Search results

Summary of Contents for OpenScape Cordless Enterprise

Reviews:

Related manuals for OpenScape Cordless Enterprise

Brands by name

Popular brands

Unify OpenScape Cordless Enterprise, User Manual

Search results

Summary of Contents for OpenScape Cordless Enterprise

Reviews:

Related manuals for OpenScape Cordless Enterprise

Brands by name

Popular brands