Unify OpenScape Business V2, How-To

Page: 48 / 53

OpenScape Business V2 – How To: Circuit Interconnection
48
resFE_MITOSFW_TLS_SOCK_OUTGOINGUNKNOWNCA: unknown_ca TLS alert sent
8.9. Circuit connectivity Wizard starts with all fields filled out, but nothing ongoing
Please Disable Checkbox “Enable Circuit” and press OK&Next.
End the Circuit connectivity Wizard and start again from scratch (Chapter 3.2).
8.10. Firewall and General Problems after running Circuit Connector Wizard
Please check via Expert Mode the IP Addresses and ports, you should got from Circuit, by running the Circuit Connectivity Wizard.
(Normally empty). Check your Firewall Settings.
For EU we need outgoing connections from OSBiz to TCP eu.yourcircuit.com:443, Outgoing connections to TCP 35.246.135.106,
Port 65060 and 65061media UDP open from/to 34.76.3.39:10000-20000
and 35.246.129.43:10000-20000
and incoming TCP connections open from 35.246.135.106 to OSBiz signaling IP:port.
New additional SBC behind loadbalancer (October 2019)
35.233.23.114:10000-20000
35.198.129.132:10000-20000
34.77.77.239:10000-20000
35.246.191.177:10000-20000
For US
- outgoing connections from OSBiz to TCP na.yourcircuit.com:443
- Outgoing connections to TCP 35.222.85.63:65060, 35.222.85.63:65061 (TLS)
- media UDP open from/to 35.231.244.59:10000-49999, and 35.232.51.243:10000-49999
- incoming TCP connections open from 35.222.85.63 to OSBiz signaling IP:port.