Unify OpenScape 600 User Manual Download Page 188

Page: 188 / 233

188

Activating functions for another phone

If configured (ask relevant Administrator), you can activate or deactivate the fol-
lowing functions for other phones (assoc. Services):

• DND on/DND off, Code

97/#97



page 169

• Forwarding on, Code

11,

12,

13/#1



page 108

• Lock phone/Open phone, Code

66/#66



page 171

• Group ringing, Code

81/#81



page 162

• Response text on/Response text off, Code

69/#69



page 106

• Group calls on/Group calls off, Code

85/#85



page 162

• Reset services, Code #0



page 187

• Night answer on/Night answer off, Code

44/#44



page 201

• Timed reminder on/Timed reminder off, Code

46/#46



page 181

If nec. Press Main Menu key.

Open using the Softkey.

Open with softkey.

€

Select "more features".

Confirm.

€

Select "assoc. Services".

Confirm.

Enter the internal phone number of the phone for which the function is to be ac-
tivated.

Enter code – e.g.

97 for DND on.

Follow the user prompting on the display for any possible further input.

Service/Settings

Service menu

more features

assoc. Services

Summary of Contents for OpenScape 600










































































































































































































































Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands

Unify OpenScape 600, User Manual

Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands