manualshive.com logo in svg

Unify OpenScape 600, User Manual

Share
Download
Unify OpenScape 600 User Manual Download Page 162

162

Group calls / hunt group

If configured (ask relevant Administrator), your connection is part of a team. The 
team consists of internal phone connections that can make use of particular fun-
ctions.

Group call on/off

If this has been configured (ask relevant Administrator), you will belong to one 
or more groups of members who can be reached via a hunt group or group call 
phone number.
Calls are signaled on all telephones in the group either in succession (=hunt 
group) or simultaneously (=group call), until a member of the group answers the 
call.

Every party in the group can also remain available under his/her own phone 
number.

You can activate and deactivate the call for the hunt group, group call, or for the 
individual lines of a group.

You belong to a hunt group or group call group

@

If nec. Press Main Menu key.

€

Select "Group calls off".

Confirm.

or

€

Select "Group calls on".

Confirm.

or

Press key.

or

Press key.

If your phone is connected to a system network via LAN, pay attention to 
specific features 

 page 199!

Group calls off

_

Group calls on

_

Group call on/off

-

_

Group call on/off

-

¤

Summary of Contents for OpenScape 600










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands