Additional functions
73
Data exchange between a PC and a handset or be-
tween two handsets
You can transfer data between a PC and your handset, or between two
handsets.
Interface overview
The handset supports the following interfaces for data exchange:
Mobile Phone Manager (MPM application)
You can use the MPM application, for example, for read and write access
to your handset phonebook, as well as to load sounds (.mid) and pictures
(.bmp) for the screensaver from the computer to the handset. The MPM
application must be installed on your PC for this purpose. It can be down-
loaded as freeware from the Internet.
"Data Transfer" is shown on the display during data transfer between the
handset and PC. No inputs are possible via the keyboard when this opera-
tion is active and incoming calls are ignored.
The MPM application supports different DECT and GSM handset types.
Terminal functions that are not supported are dimmed and cannot be se-
lected.
For more detailed information, refer to the Mobile Phone Manager help
function.
Interface
Connect via...
Data transfer be-
tween...
Serial V24 interface
Cable (Slim Lumberg)
PC <-> handset
USB interface
Cable (Slim Lumberg)
PC <-> handset
Bluetooth interface
Radio, cordless
PC <-> handset and
Handset <-> handset
Note:
Only read and write access to phonebook data is permitted via the
Bluetooth interface.
Summary of Contents for Gigaset M2
