R
F
ID
Preface
Thanks for your purchase. This keypad can be installed at the
entrance. By input password, users can easily operate the keypad to
fulfill functions such as away arm, disarm, home arm, doorbell, RFID
disarm etc.
Keypad Status instruction
List of items
1
2
Wireless keypad*1
Dry battery AAA*3
User manual*1
Setscrews and screws*2
1.Normal working status: the LED will light on 3 seconds if user press
any numeric keys. After 3 seconds, the LED will light off automatically
if there is no further operation.
2.Dormant status: usually the keypad will enter dormant status if
there is no further operation within 30 seconds.(By Press any button,
the keypad will enter working status. And if the keypad detect battery
in low voltage before dormant status, it will send low voltage signal to
alarm panel.)
3.RFID swiping card status: press
button, LED lights on and the
keypad will enter swiping tag status. If the keypad detect the RFID
tag or if there is no tag within 10 seconds, then the keypad will return
to dormant status.
4.Setting status:
and then press
button, the keypad will enter functional setting status. The LED will
flash at 500ms. Press
button to exit or if there is no operation
within 30 seconds, the keypad will exit from functional setting status
and enter return to dormant status.
Note: if operation is correct, the buzzer will make a sound like
.
if operation is wrong, then the buzzer will make two sounds like
.
Under normal working status, press other keys except the
button and numeric keys, the input will end.
Under functional setting status, press
button to end the input.
“*”
input Administrator password
“#”
“*”
“beep”
“beep, beep”
“*”
“#”
