5
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that’s free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the “Operating Instructions” section of
this manual) (not included) .
• (1) precision-filled gas cylinder between 11kg and 15kg . Your
barbecue will perform better if propane or LPG mixtures are
used . (not included) .
Typical assembly is approximately one hour .
Assembly Instructions
DO NOT RETURN TO PLACE OF PURCHASE.
1
Attach Casters
2
Attach Upper Front Frame Support
4
Attach Left, Right and Rear Frame Panels
3
Note:
Locking casters go in the back .
I
x 11
C
x 11
H
x 11
C I H
A
C H
A
x 4
C
x 4
H
x 4
