1. Via the Function key, you can adjust the desired settings. After pressing the Function key
once, the display shows "Interval Set". Adjust the interval between each fog emission
(within the range of 1 to 255 seconds) by means of the Up-/Down keys. By pressing the
Function-key twice, the display shows "Duration Set". Adjust the duration of each fog
emission (within the range of 1 to 20 seconds) by means of the Up/Down keys. Under the
menus "Timer Out" and "Volume Out" you can adjust the output volume by means of the
Up/Down keys. The menu "DMX Add" refers to adjusting the DMX address for DMX
control or synchronization. Adjust the desired DMX-address by means of the Up/Down
keys.
2. Press the Timer key to activate the timer function. The display shows the adjusted interval
and the device counts the seconds down to "0". After that, the fog emission is triggered at
the volume adjusted under "Timer Out". The duration depends on the settings adjusted
under "Duration Set". If you wish to deactivate the timer function, press the Timer key
once more.
3. Press the Volume switch for immediate triggering of the fog emission at the volume
adjusted under "Volume Out". Press the Volume switch once more in order to stop the fog
emission.
4. Press the Manual key for immediate triggering of the fog emission at 100 % volume. Let
the Manual key loose in order to stop the fog emission.
For control of the DMX settings please refer to the section on Page 6 titled Antari
Z-Series Onboard DMX Fog Machine Settings
��
Z-4:
10 meter wired remote controller with five-prong plug for ANTARI Fog Machine
models
Z-800
and
Z-1000
. To use the Z-4 remote control, press the red POWER button
to enable the remote’s functions. The two knobs allow the operator to customize fog
machine operation by adjusting output duration and interval. Press the yellow TIMER
button to activate the timer function. Adjust the interval between each fog emission (within
the range of 10 seconds to 5 minutes) by means of the INTERVAL control knob. Adjust
the duration of each fog emission (within the range of 1 to 10 seconds) by means of the
DURATION control knob. When pressed, the green FOG button overrides all other
function controls, and activates maximum output.
��
Z-5:
Wireless remote controller with five-prong plug for ANTARI Fog Machine models
Z-
800
and
Z-1000
. Remote operation is possible up to a distance of 50 meters.
��
Z-8:
10 meter wired timer and volume remote control for the
Z-1200
ANTARI Fog
Machine. To engage the timer function presses the yellow button on the handheld unit.
The duration knob regulates the length of time of the smoke blast. The blast can be set
for between 1 and 15 seconds. The interval knob controls the amount of time between
blasts. This can be set between 10 and 255 seconds. For continuous fogging, depress
the red button marked
Continuous
. This will set the unit to fog steadily at the selected
volume. The volume of fog produced is regulated via the output knob. This varies
between 0 and 100% of maximum volume output. The green
Manual
button overrides
any timer and/or volume settings to deliver a full volume blast of fog for as long as the
button is held down.
4
UNIFIRE
UNIFIRE
UNIFIRE
UNIFIRE
